Venous thromboembolism (VTE) is one of the most common preventable cause of morbidity and mortality after trauma. Though most of the western countries have their guidelines for thromboprophylaxis in these patients, India still does not have these. The increasing detection of VTE among Indian population, lack of awareness, underestimation of the risk, and fear of bleeding complications after chemical prophylaxis have made deep vein thrombosis (DVT) a serious problem, hence a standard guideline for thromboprophylaxis after trauma is essential. The present review article discusses the incidence of DVT and role of thromboprophylaxis in Indian patients who have sustained major orthopedic trauma. A thorough search of 'PubMed' and 'Google Scholar' revealed 10 studies regarding venous thromboembolism in Indian patients after major orthopedic trauma surgery (hip or proximal femur fracture and spine injury). Most of these studies have evaluated venous thromboembolism in patients of arthroplasty and trauma. The incidence, risk factors, diagnosis and management of VTE in the subgroup of trauma patients (1049 patients) were separately evaluated after segregating them from the arthroplasty patients. Except two studies, which were based on spinal injury, all other studies recommended screening/ thromboprophylaxis in posttraumatic conditions in the Indian population. Color Doppler was used as common diagnostic or screening tool in most of the studies (eight studies, 722 patients). The incidence of VTE among thromboprophylaxis-receiving group was found to be 8% (10/125), whereas it was much higher (14.49%, 40/276) in patients not receiving any form of prophylaxis. Indian patients have definite risk of venous thromboembolism after major orthopedic trauma (except spinal injury), and thromboprophylaxis either by chemical or mechanical methods seems to be justified in them.

While intramedullary nailing has been established as the treatment of choice for diaphyseal fractures of the femur and tibia, its role in the management of diaphyseal humeral fractures remains controversial. The reasons include not only the complicated anatomy and unique biomechanical characteristics of the arm but also the fact that surgical technique and nail designs devised for the treatment of femoral and tibial fractures are being transposed to the humerus. As a result there is no consensus on many aspects of the humeral nailing procedure, e.g., the basic nail design, nail selection criteria, timing of the procedure, and the fundamental principles of the surgical technique (e.g., antegrade/retrograde, reamed/unreamed, and static/dynamic). These issues will be analyzed and discussed in the present article. Proposals aiming to improve outcomes include the categorization of humeral nails in two distinct groups: "fixed" and "bio", avoidance of reaming for the antegrade technique and utilization of "semi-reaming" for the retrograde technique, guidelines for reducing complications, setting the best "timing" for nailing and criteria for selecting the most appropriate surgical technique (antegrade or retrograde). Finally, suggestions are made on proper planning and conducting clinical and biomechanical studies regarding the use of intramedullary nailing in the management of humeral shaft fractures.

Background: The surgical approach, type of olecranon osteotomy, method of stabilization of osteotomy, type of fracture stabilization, orthogonal vs parallel plate fixation, need for transposition of ulnar nerve, place for primary total elbow replacement, and type of rehabilitation schedule after surgical fracture treatment are the controversial issues in the treatment of complex intra-articular distal humerus fractures (C2 and C3) in adults. Severe comminution, bone loss, and osteoporosis at the site of distal articular fractures of humerus often lead to unsatisfactory results due to inadequate fixation. We hereby report the outcome of a series of intracondylar fractures of the humerus treated by open reduction and internal fixation and discuss the controversies in light of published literature. Materials and Methods: One hundred and eighty-four patients of intra-articular fractures of distal humerus (C2 and C3) were operated by posterior transolecranon approach between January 1980 and December 2008. Initially, in the first part Chevron intra-articular osteotomy (n=108) was performed out of which 94 have been published in another publication. In later second part (1993 onward), extra-articular olecranon osteotomy (n=76) was routinely performed. Both columns were stably fixed by orthogonal methods; (n=174) however, during the last 2 years, in 10 patients with severe comminution with bone loss, stabilization was achieved by parallel plating. The osteotomy was routinely stabilized by tension band wiring with two parallel K-wires introduced up to the anterior ulnar cortex. The results were evaluated by the staging system of Caja et al. at a minimum follow-up of 2 years. Results: In the first part of the study (n=94), there was delayed union in 4% (n=4), with the fracture taking more than 20 weeks for union. There was delayed union of ulnar osteotomy (n=3) and failure of one tension band wiring, requiring revision. Some loss of motion was seen in 20% of cases and these patients did not achieve full flexion and extension. However, all these patients had useful range of function, with 20΀-110΀ of flexion and full pronation-supination. As per the staging system of Caja et al., the results were in the range of excellent to good in 72% cases (n=67), fair in 19% (n=18), and poor in 9% patients (n=9). In the second part of study (n=90) dual plate fixation of both columns by orthogonal methods (n=80) and parallel plate fixation in 10 patients was performed. The results were excellent to good in 78 patients (86%). Conclusions: The high rate of union can be achieved in complex intra-articular fractures of distal humerus if the proper principles of stable fracture fixation are followed, i.e., a posterior transolecranon approach and dual fixation of both columns and restoration of the continuity of articular surface. The stability achieved by this technique permits institution of early intensive physiotherapy to restore elbow function.

Background: Repair of diaphyseal bone defects is a challenging problem for orthopedic surgeons. In large bone defects the quantity of harvested autogenous bone may not be sufficient to fill the gap and then the use of synthetic or allogenic grafts along with autogenous bone becomes mandatory to achieve compact filling. Finding the optimal graft mixture for treatment of large diaphyseal defects is an important goal in contemporary orthopedics and this was the main focus of this study. The aim of this study is to investigate the efficacy of demineralized bone matrix (DBM) and autogenous cancellous bone (ACB) graft composite in a rabbit bilateral ulna segmental defect model. Materials and Methods: Twenty-seven adult female rabbits were divided into five groups. A two-centimeter piece of long bone on the midshaft of the ulna was osteotomized and removed from the rabbits' forearms. In group 1 (n=7) the defects were treated with ACB, in group 2 (n=7) with DBM, and in group 3 (n=7) with ACB and DBM in the ratio of 1:1. Groups 4 and 5, with three rabbits in each group, were the negative and positive controls, respectively. Twelve weeks after implantation the rabbits were sacrificed and union was evaluated with radiograph (Faxitron), dual-energy x-ray absorptiometry (DEXA), and histological methods (decalcified sectioning). Results: Union rates and the volume of new bone in the different groups were as follows: group 1 - 92.8% union and 78.6% new bone; group 2 - 72.2% union and 63.6% new bone; and group 3 - 100% union and 100% new bone. DEXA results (bone mineral density [BMD]) were as follows: group 1 - 0.164 g/cm ² , group 2 - 0.138 g/cm ² , and group 3 - 0.194 g/cm ² . Conclusions: DBM serves as a graft extender or enhancer for autogenous graft and decreases the need of autogenous bone graft in the treatment of bone defects. In this study, the DBM and ACB composite facilitated the healing process. The union rate was better with the combination than with the use of any one of these grafts alone.

Background: Documentation of femoral head blood flow before, during and after head preserving surgery is important for safeguarding vascularity to the femoral head and for documentation in patients in whom the blood flow is compromised. Laser Doppler flowmetry and microsensor intracranial pressure (ICP) transducers have been used to satisfactorily depict such changes. However, these devices are expensive and not universally available in orthopedic operating rooms. We describe a new technique for the assessment of intra-operative blood flow to the femoral head. This is a technical description of a simple system utilized in eight patients to assess the femoral head vascularity using equipment available with the anesthetist. Materials and Methods: A standard epidural catheter attached to an arterial pressure transducer is introduced into the femoral head from the margin of the articular surface via a small hole drilled with a K wire. The pressure wave within the epiphysis is detected on the anesthesia monitor. Pressure within the femoral head is used as a surrogate for blood flow. The pressure and the wave form are correlated with the electrocardiogram (ECG) wave on the anesthetic machine. The technique was used in eight children with hip pathology requiring hip dislocation for documenting the hip vascularity status. Result: There was good correlation between the pressure wave and the ECG for a patient with presumed normal femoral head vascularity, whereas the pressure measurements were greatly reduced and the wave form was absent in a femoral head wih radiographic or bone scan evidence of avascular necrosis. Conclusion: This new technique is a cheap and readily accessible alternative to Laser Doppler flowmetery and ICPs monitoring probes for the assessment of blood flow to the femoral head.

Background: Cemented hip arthroplasty is an established treatment for femoral neck fracture in the mobile elderly. Cement pressurization raises intramedullary pressure and may lead to fat embolization, resulting in fatal bone cement implantation syndrome, particularly in patients with multiple comorbidities. The cementless stem technique may reduce this mortality risk but it is technically demanding and needs precise planning and execution. We report the perioperative mortality and morbidity of cementless bipolar hemiarthroplasty in a series of mobile elderly patients (age >70 years) with femoral neck fractures. Materials and Methods: Twenty-nine elderly patients with mean age of 83 years (range:71-102 years) with femoral neck fractures (23 neck of femur and 6 intertrochanteric) were operated over a 2-year period (Nov 2005-Oct 2007). All were treated with cementless bipolar hemiarthroplasty. Clinical and radiological follow-up was done at 3 months, 6 months, 12 months, and then yearly. Results: T he average follow-up was 36 months (range 26-49 months). The average duration of surgery and blood loss was 28 min from skin to skin (range, 20-50 min) and 260 ml (range, 95-535 ml), respectively. Average blood transfusion was 1.4 units (range, 0 to 4 units) Mean duration of hospital stay was 11.9 days (7-26 days). We had no perioperative mortality or serious morbidity. We lost two patients to follow-up after 12 months, while three others died due to medical conditions (10-16 months post surgery). Twenty-four patients were followed to final follow-up (average 36 months; range: 26-49 months). All were ambulatory and had painless hips; the mean Harris hip score was 85 (range: 69-96). Conclusion: Cementless bipolar hemiarthroplasty for femoral neck fractures in the very elderly permits early return to premorbid life and is not associated with any untoward cardiac event in the perioperative period. It can be considered a treatment option in this select group.

Background: Two major therapeutic principles can be employed for the treatment of distal femoral fractures: retrograde intramedullary (IM) nailing (RN) or less invasive stabilization on system (LISS). Both operative stabilizing systems follow the principle of biological osteosynthesis. IM nailing protects the soft-tissue envelope due to its minimally invasive approach and closed reduction techniques better than distal femoral locked plating. The purpose of this study was to evaluate and compare outcome of distal femur fracture stabilization using RN or LISS techniques. Materials and Methods: In a retrospective study from 2003 to 2008, we analyzed 115 patients with distal femur fracture who had been treated by retrograde IM nailing (59 patients) or LISS plating (56 patients). In the two cohort groups, mean age was 54 years (17-89 years). Mechanism of injury was high energy impact in 57% (53% RN, 67% LISS) and low-energy injury in 43% (47% RN, 33% LISS), respectively. Fractures were classified according to AO classification: there were 52 type A fractures (RN 31, LISS 21) and 63 type C fractures (RN 28, LISS 35); 32% (RN) and 56% (LISS) were open and 68% (RN) and 44% (LISS) were closed fractures, respectively. Functional and radiological outcome was assessed. Results: Clinical and radiographic evaluation demonstrated osseous healing within 6 months following RN and following LISS plating in over 90% of patients. However, no statistically significant differences were found for the parameters time to osseous healing, rate of nonunion, and postoperative complications. The following complications were treated: hematoma formation (one patient RN and three patients LISS), superficial infection (one patient RN and three patients LISS), deep infection (2 patients LISS). Additional secondary bone grafting for successful healing 3 months after the primary operation was required in four patients in the RN (7% of patients) and six in the LISS group (10% of patients). Accumulative result of functional outcome using the Knee and Osteoarthritis Outcome (KOOS) score demonstrated in type A fractures a score of 263 (RN) and 260 (LISS), and in type C fractures 257 (RN) and 218 (LISS). Differences between groups for type A were statistically insignificant, statistical analysis for type C fractures between the two groups are not possible, since in type C2 and C3 fractures only LISS plating was performed. Conclusion: Both retrograde IM nailing and angular stable plating are adequate treatment options for distal femur fractures. Locked plating can be used for all distal femur fractures including complex type C fractures, periprosthetic fractures, as well as osteoporotic fractures. IM nailing provides favorable stability and can be successfully implanted in bilateral or multisegmental fractures of the lower extremity as well as in extra-articular fractures. However, both systems require precise preoperative planning and advanced surgical experience to reduce the risk of revision surgery. Clinical outcome largely depends on surgical technique rather than on the choice of implant.

Background: Variations in the anatomy of knee are well described, however the true incidence of component asymmetry in bilateral total knee arthroplsties is rarely reported. Incidence of component asymmetry in bilateral total knee arthroplasties (TKA) was retrospectively analysed in 289 cruciate retaining total knee arthroplasties. Materials and Methods: Medical records of these 289 patients were evaluated for the incidence of asymmetry of either femoral or tibial components. Clinical outcomes were compared between the cases of asymetrical components to that of symmetrical components. Results: Incidence of femoral component asymmetry was found to be 9.2% and tibial component asymmetry to be 8.7%. Of 289 cases, TKA 178 were done in a single day (group A), while 111 were done at 2- to 3-day intervals (group B). Asymmetric and symmetric knees were equally distributed among both groups, male and female patients in both groups, and the incidence of component asymmetry was similar between all four different implants - Optetrak-CR (Exactech, Gainesville, FL, USA), Nexgen-CR (Zimmer, Warsaw, IN, USA), PFC-Sigma CR (DePuy, Warsaw, IN, USA), Genesis II CR (Smith and Nephew, Memphis, TN, USA) we used. The pre- and postoperative range of motion and pre- and postoperative knee society scores were compared between the symmetric and asymmetric cases in both the groups and the difference was found to be insignificant. Conclusion: We conclude that incidence of component asymmetry in bilateral total knee arthroplasty is around 9 % and independent sizing of both knees during bilateral arthoplasty is recommended rather than simply relying on the contralateral knee measurements.

Background: Interference screw is a popular fixation device used to rigidly fix bone-patellar tendon-bone (B-PT-B) graft both in femoral and tibial tunnels in anterior cruciate ligament (ACL) reconstruction. Parallel placement of screw is difficult in transtibially drilled femoral tunnel but always desired as it affects pullout strength of the graft. Commonly, interference screw into the femoral tunnel is inserted through the anteromedial (AM) or accessory AM portal. These portals are not-in-line with the transtibially drilled femoral tunnel. Furthermore, these portals increase the divergence of the interference screw in the femoral tunnel. We hypothesized that interference screw placement through patellar tendon (PT) portal (through donor defect) in transtibially drilled femoral tunnel can be less divergent. We report the prospective randomized study to investigate the difference of divergence of interference screw placed through PT portal and AM portal and its clinical relevance. Materials and Methods : Forty-one patients underwent femoral tunnel B-PT-B graft fixation through AM portal (group 1) and other 41 (group 2) through PT portal. Femoral tunnel-interference screw divergence was measured on postoperative digital lateral X-rays. Ha's method was used to grade divergence. The clinical outcome was assessed by postoperative intervention knee documentation committee grading (IKDC) and Lysholm score at 2 years followup. Results: Mean tunnel-screw divergence in sagittal plane through AM portal was 13.38 ^o (95% CI: 12.34-14.41) and through PT portal was 7.20 ^o (95% CI: 6.25-8.16) (P<0.0001). In AM portal group, 82.9% patients had divergence in either grade 3 or 4 category, whereas in PT portal group, 82.9% patients were in grade 1 or 2 category (P<0.0001). Mean Lysholm score were 92.8 and 94.5 at two-year follow-up in both groups which were statistically not significant. The International knee documentation committee grades of patients in both groups were similar and had no statistical significance. Conclusion: Femoral interference screw placement through the PT portal leads to significantly less screw divergence as compared with screw placement through the AM portal. However, this difference in divergence is not reflected in clinical outcome.

Background: Global fusion is recommended in sub-axial cervical spine injuries with retrolisthesis, translation rotation injuries associated with end plate or tear drop fractures. We propose a modification of Stellerman's algorithm which we have used where in patients are primarily treated via anterior decompression and fixation. Global fusion was done only in cases where post-decompression traction does not achieve reduction in cases with locked facets. Materials and Methods: Two hundred and thirty consecutive patients with sub-axial cervical spine injuries were studied in a prospective trial over a 7 year period. Seven cases with posterior compression alone were not subjected to our protocol. Of the other 223 cases, 191 cases who on radiological evaluation needed surgery were initially approached anteriorly. Decompression was effected through a corpectomy in 14 cases and a single or multiple level disc excisions were performed in the others. Cases with cervical listhesis (n=36) where on table reduction could not be achieved following decompression were subjected to progressive skeletal traction for 48 h. Posterior facetectomy and global fixation was done for patients in whom reduction could not be achieved despite post-decompression traction (n=11). Results: Of the 223 cases, 20 cases were managed conservatively, 12 cases expired pre-operatively, and the remaining 191 cases needed surgical intervention. Out of the 154 cases of distraction/rotation/translation injuries on table reduction could be achieved in 118 cases (76.6%). Thirty-six patients had locked facets (23 cases were bifacetal, 13 cases unifacetal) and of these 36 cases reduction could be achieved with post-anterior decompression traction in 25 patients (16.2%); however, only 11 cases (7.1%)-8 bifacetal and 3 unifacetal dislocations-needed posterior facetectomy and global fusion.One hundred and forty-three patients were followed up for a minimum period of 6 months. One hundred and twenty-six patients showed evidence of complete fusion (88.1%) while the remaining 17 (11.8) showed evidence of partial fusion. There were no signs of instability on clinical and radiological evaluation in any of the cases. Reduction of graft height was noted in 18 patients (12.5%). There were eight cases of immediate postoperative mortality and two cases of delayed mortality in our series of cases. Conclusion: We feel that on table decompression and reduction followed by anterior stabilization can be used as the initial surgical approach to manage most types of cervical injuries. In rotation/translational cases where reduction cannot be achieved, monitored cervical traction on the decompressed spine can safely achieve reduction and hence avoid the need for a posterior facetectomy in a large percentage of cases.

Congenital insensitivity to pain and anhidrosis (CIPA) is a rare reported entity characterised by disturbance in the pain and temperature perception due to involvement of the autonomic and sensory nervous system. It is an autosomal recessive trait with several defects of the gene NTRK1 coding for the neurotrophic tyrosine kinase - a nerve growth factor receptor on chromosome 1q21-q22. Traumatic fractures are common and, because of lack of pain, may go unrecognised for prolonged periods, resulting in nonunion or pseudoarthrosis. A Charcot joint may be the end result. Treatment complications are very common in these patients and range from infection to wound breakdown to failure of fixation. We report here a rare case of CIPA in a 9-year-old girl and her younger male sibling with generalised absence of pain, anhidrosis and its orthopaedic implications.

Athletic traumatic hip subluxations are rare. Classic radiographic features have been well described. This case highlights the potential pitfalls of immediate magnetic resonance imaging. Femoral head contusions and acetabular rim fractures are common associated findings usually apparent with magnetic resonance imaging (MRI). However, in this case an MRI done 3 hours post injury failed to show any edema in either location, making the appearance of these findings on subsequent MRIs difficult to interpret. An acute MRI more than 48 hours post injury may have been more helpful.

A 17-year-old male presented to us following a hyperflexion injury to his right knee sustained while playing soccer. Immediately after the traumatic event, he developed a large, tense knee effusion. Physical examination revealed limited range of motion. MRI revealed a lobulated mass in the posteromedial aspect of the knee joint. The mass was excised and sections submitted to pathology. A pathologic, microscopic, and immunohistochemical characteristics revealed the final diagnosis of fibroma of tendon sheath in the knee. At 12 months followup, the patient reported no subjective symptoms, such as pain or limitation of athletic activities and has full range of motion. Additionally, he has demonstrated no signs of recurrence. We report a case of fibroma of the tendon sheath originating from the synovial membrane of the joint capsule of the knee.

We report a sporadic case of progressive osseous heteroplasia (POH) in a 10-year-old male child who developed progressive ossification of the skin and deep connective tissue. The condition needs to be distinguished from other causes of childhood heterotopic ossification, such as fibrodysplasia ossificans progressiva, pseudohypoparathyroidism, and pseudopseudohypoparathyroidism. The cause of POH is an inactivating GNAS1 (guanine nucleotide-binding protein alpha-stimulating activity polypeptide 1) mutation caused only by paternal inheritance of the mutant allele. Most cases are sporadic and only 2 instances of familial transmission have been documented, suggesting an autosomal dominant mode of inheritance with possible somatic mosaicism. The condition is associated with progressive superficial to deep ossification, progressive restriction of range of motion, bleak prognosis, and recurrence if excised.