Neurobionplus
Home About Journal AHEAD OF PRINT Current Issue Back Issues Instructions Submission Search Subscribe Blog    
Login 

Users Online: 2234 
Print this page  Email this page Small font sizeDefault font sizeIncrease font size 
 


 
 Table of Contents    
ORIGINAL ARTICLE  
Year : 2012  |  Volume : 46  |  Issue : 6  |  Page : 675-679
Prediction of the rotational state of the humerus by comparing the contour of the contralateral bicipital groove: Method for intraoperative evaluation


1 Department of Orthopaedic Surgery, Kangbuk Samsung Hospital, Sungkyunkwan University School of Medicine, Seoul, Republic of Korea
2 Department of Mechanical Engineering, Korea University, Seoul, Republic of Korea

Click here for correspondence address and email

Date of Web Publication3-Dec-2012
 

   Abstract 

Background: Accurate reduction of rotational displacement for transverse or comminute fracture of humeral shaft fracture is difficult during operation. The purpose of this study was to evaluate the reliability of the bicipital groove as a point of reference for the prediction of the rotational state of the humerus on two dimensional images of C-arm image intensifier during operation for humeral shaft fractures.
Materials and Methods: One hundred subjects, 62 male, 38 female, aged 22-53 years were recruited contralateral bicipital groove on the 45 degrees externally rotational standard anterior-posterior view recorded before surgery. Three observers, watched only contour of bicipital groove in monitor of C-arm image intensification with naked eye without looking at the subject and predicted rotational state of the humerus by comparing the contour of the opposite side of bicipital groove. The angle of discrepancy from real rotational position was then assessed.
Results: The mean (SD), angular discrepancy between the neutral point and the predicted angle was 3.4°(±2.7°). A value within 5° was present in 72% of cases. All observations were within 15°. There was no interobserver variation (P = 0.47). The intraclass correlation coefficient (ICC) was 0.847.
Conclusion: Contour of the bicipital groove on simple radiograph was a useful landmark. Comparing the contour of the bicipital groove in the 45 degrees externally rotational standard view bilaterally, was an effective method for reduction of rotational displacement of the humerus.

Keywords: Bicipital groove, fracture, greater tuberosity, humerus, lesser tuberosity, rotation

How to cite this article:
Park SJ, Kim E, Jeong HJ, Lee J, Park S. Prediction of the rotational state of the humerus by comparing the contour of the contralateral bicipital groove: Method for intraoperative evaluation. Indian J Orthop 2012;46:675-9

How to cite this URL:
Park SJ, Kim E, Jeong HJ, Lee J, Park S. Prediction of the rotational state of the humerus by comparing the contour of the contralateral bicipital groove: Method for intraoperative evaluation. Indian J Orthop [serial online] 2012 [cited 2019 Dec 10];46:675-9. Available from: http://www.ijoonline.com/text.asp?2012/46/6/675/104210

   Introduction Top


Orthopaedic surgeons may find it difficult to get rotationally anatomical reduction of a shaft fracture of the humerus. Li et al. [1] reported 27.2% of malrotation of 20° or more after intramedullary nailing. If rotational control is not achieved, nonunion is more likely to occur. [2] In addition, malrotation of the humeral component of total elbow replacement influences laxity and causes maltracking. [3] The rotational deformity of the distal humerus may limit the motion of the ipsilateral shoulder joint. [4] Few technical tip or study have introduced to prevent malrotation of the humerus. The authors tried to find a simple landmark for prediction of rotational status during the operation. The anatomical structure of the bicipital groove varies among individuals. However, the position and shape are similar when the left and the right bicipital groove structures are compared in each individual. [5],[6],[7] The objective of this study was to evaluate the reliability of the bicipital groove as a point of reference for the prediction of the rotational state of the humerus, by comparing the contralateral bicipital groove images on standard radiographs.


   Materials and Methods Top


One hundred volunteers were included in this study. The mean age of the 62 men was 34 ± 7.5 years (range, 24-53), and the mean age of the 38 women was 33 ± 6.8 years (range, 22-48). Subject who had a history of shoulder disease or fracture of the humerus were excluded. All volunteers gave informed consent about the radiation. The college and hospital institutional review board approved the protocols of this study.

First, the subject was placed in the supine position with the shoulder abducted to 90˚; the elbow flexion was to the same at 90˚ when the forearm was pronated fully. The images were obtained in the cephalic view at a 45˚ angle, a point with a clear outline of the lesser and greater tuberosity [Figure 1]. Images of the bicipital groove, at 45° of external rotation, were used in this study [Figure 2]. The angular orientation of the bicipital groove has been referenced to the transepicondylar axis at about 55° in prior studies. [8],[9] Then, standard line were drawn on the medial border of ulna from the tip of olecranon to the styloid process of the forearm [Figure 3]a. At the neutral rotation point, the shape of the proximal humerus was recorded and transferred to the right monitor of a C-arm image intensifier (OEC series 9800; OEC Medical Systems, Salt Lake City, Utah, USA) as a reference point for the rotational state. The contralateral (left) arm was taken position in the same posture. The subject arm was in a random position, rotationally, with the shoulder abduction at 90°. The observer group was composed of one expert surgeon (A), one orthopaedic resident (B), and one medical student (C). All three observers stood in front of the monitor, where they could not see the individual. They compared the images of the bilateral bicipital groove on the monitors with regard to the contour and proximal and distal width of the bicipital groove, distance of the interval from the lateral cortex of the proximal humerus to the lesser tuberosity, with the naked eyes [Figure 2]c. An assistant rotated the arm being examined inward or outward, and the point where the subjective image of the arm showed a similar and symmetrical shape to the image of the bicipital groove, previously recorded on the right side of the monitor [Figure 3]b, was noted. The angular divergence was measured from the neutral point [Figure 3]c. The distribution and mean angular discrepancy were calculated using the values obtained from the three observers. The data were not normally distributed and therefore were logarithmically transformed. The Interobserver variation was evaluated statistically using the analysis of variance. The interobserver reliability was evaluated by calculating the Intraclass Correlation Coefficient (ICC) using PASW 17.0 statistical software (SPSS Inc, Chicago, IL, USA) for windows (Microsoft, Redmond, WA, USA).
Figure 1: Preparing the image of the contralateral shoulder. (The individual is in the supine position with the shoulder abducted at 90° (a), with a fully pronated forearm (b), and the image intensifi er is at 45° in the cephalad view (c))

Click here to view
Figure 2: Fluoroscopic images of the proximal humerus. (Internal rotation at 45° (a), Neutral (b), External rotation at 45° which the line of the greater and lesser tuberosity make clear contour of the bicipital groove on radiograph in 45 degree rotated externally (c))

Click here to view
Figure 3: Comparing the subjective shoulder with the contralateral shoulder. (Lines are drawn on the medial border of the ulna from the tip of the olecranon to the styloid process on the subjective arm (a). An assistant rotate the subjective arm with random rotation being examined inward or outward until an observer select the similar image with the contralateral one (b) and measure the angular difference from the neutral point (c))

Click here to view



   Results Top


All observations which were expressed as an absolute value were placed within 15° of the neutral point. The discrepancy for the mean angular measurements were from -4° to +4° in 72% of the assessments for each observer and 99% of the assessments were within 10° [Table 1]. The total mean angular discrepancy was 3.4° (±2.7°). Those of each observer was 3.6° (±3.0°) in observer A, 3.2° (±2.3°) in observer B and 3.4° (±2.7°) in observer C. These differences were not statistically significant based on analysis of variance (ANOVA) (P = 0.495) [Table 2]. In addition, the intraclass correlation coefficient (ICC) was calculated to evaluate the interobserver reliability. The ICC value was calculated to be 0.847, which indicates a high interobserver reliability (>0.70). There was no interobserver variation (P = 0.47).
Table 1: Discrepancy in the angular distribution by the observers

Click here to view
Table 2: Measured angular differences

Click here to view



   Discussion Top


The bicipital groove of the proximal humerus has been extensively studied and its anatomy well documented. [8],[10],[11] Some investigators have used the bicipital groove as a reference point with computed tomography. [9],[12] The relationship of the bicipital groove with humeral retroversion in cadavers was studied. [13],[14] Several investigators have suggested that the position of the bicipital groove relative to the humeral head is comparable. [13],[14],[15] However, most investigations of the bicipital groove focused on retroversion of the humerus for the prevention of malrotation, which was suggested as a cause of hemiarthroplasty failure. [15] The purpose was to evaluate the reliability of the bicipital groove as a point of reference for the prediction of the rotational state of the humerus on two-dimensional radiograph of C-arm image intensifier during operation especially for humeral shaft fractures.

This study assumed that the anatomical structures of the bicipital grooves were the same on both the right and left sides. Robertson et al. [16] found that paired humeri have similar anthropometric features. DeLude et al. [6] and Hernigou et al. [7] reported no meaningful difference in comparisons of the left side and right side. Boileau et al. [5] suggested that assessment of the rotational state of the humerus may be most accurately achieved based on the contralateral bicipital groove. Cassagnaud et al.,[17] by contrast, reported a considerable difference between right and left side measurements.

At a rotation of 45° externally, the humeral head was rotated until the base of the head was perpendicular to the axis of the proximal humerus. [15] In addition, the greater tuberosity was brought into relative clear prominence. [18] The 45° externally rotated view showed relatively clear outlines of the contours of the bicipital groove that could be easily compared to the contralateral side with the naked eye. There is a relatively wide range of variation in the bicipital groove angle from 5 to 97, with a mean value of 55.5°. [9] In cadavers, the measured angle of the bicipital groove was about 55.8°. Hempfing et al.[15] suggested that the centre of the bicipital groove differs from the epicondylar axis by about -10°. This means that the epicondyles of the distal humerus are approximately 45° in relation to the internal rotation. Thus, this position could show a relatively neutral rotational state of the humerus, hypothetically. In this study, the C-arm image intensifier was at a 45° in the cephalad view, instead of rotating the arm. It was difficult for the assistant to rotate the shoulder of an individual more externally.

The purpose of this study was to determine an accurate and simple method that could be applied in the operating room setting. Similar to Evans and Wales [19] evaluation of the rotational state, using the radial tubercle as a land mark or as Kim et al.[20] used the lesser trochanter of the femur as a landmark for the correction of the rotational status during surgery for a fracture of the shaft of the femur. To the best of our knowledge, this is the first study to consider the bicipital groove as a useful landmark for estimating the rotational state of the humeral shaft fracture in the operating room setting. This methodology also could benefit for operating the corrective osteotomy and malunion of humeral shaft fractures. Li et al. [1] found that the degree of malrotation correlated with a decreased range of motion in patents who underwent intramedullary nailing. Rotational deformities were took place according to patient's position during surgery. [21]

In the operating room, the procedures were performed by comparison of the injured side with the asymptomatic, contralateral side that was evaluated before surgery using the C-arm image intensifier. First, a 90° degree abduction and 45° external rotation antero posterior view of standard radiographs of the shoulder was performed. The shape of the bicipital groove, of the contralateral side, was then stored preoperatively in the C-arm image intensifier's second monitor. Before inserting the device, the proximal portion was rotated while the elbow was extended fully and the forearm pronated exactly until the shape of the greater tuberosity and interval of the bicipital groove was identical on both sides. This might be an effective method for successful surgical treatment of humeral shaft fractures with plate osteosynthesis or intramedullary nailing. This can be performed before the insertion of the locking screws, the surgeon controls the rotation of the proximal fragment.

There are limitations in our study. The two dimensional radiograph of C-arm image intensifier obtained was less precise than a three dimensional image and the comparison of the contour of the bilateral bicipital groove with the naked eyes of the observers was not objective. However, our methodology is cost effective, give less radiation exposure than the preoperative CT evaluation. This technique could use simply at the operating field. There was also no meaningful difference between the three observers. The study does not include clinical outcome. Further observation of clinical outcome and confirmation of these findings will be required in a larger study.


   Conclusion Top


A simple radiological contour of the bicipital groove is a useful landmark. Comparing the shape of the bicipital groove in the 45 degrees externally rotated standard view bilaterally, was an effective method for estimating the rotational state of the humerus, intraoperatively.


   Acknowledgment Top


The author Eugene Kim and Shinsuk Park were supported by the National Research Foundation grant funded by the Korea government (MEST) (2010-0027294). The authors thank to Jang Hwan Kim, M.D. and Miyeon Lee, Medical information library, Kangbuk Sung Hospital for their statistical assistance of the work.

 
   References Top

1.Li Y, Wang C, Wang M, Huang L, Huang Q. Postoperative malrotation of humeral shaft fracture after plating compared with intramedullary nailing. J Shoulder Elbow Surg 2011;20:947-54.  Back to cited text no. 1
[PUBMED]    
2.Bain GI, Sandow MJ, Howie DW. Treatment of humeral shaft fractures with the Seidel intramedullary nail. Aust N Z J Surg 1996;66:156-8.  Back to cited text no. 2
[PUBMED]    
3.Itoi E, King GJ, Neibur GL, Morrey BF, An KN. Malrotation of the humeral component of the capitellocondylar total elbow replacement is not the sole cause of dislocation. J Orthop Res 1994;12:665-71.  Back to cited text no. 3
[PUBMED]    
4.Mahaisavariya B, Laupattarakasem W. Supracondylar fracture of the humerus: malrotation versus cubitus varus deformity. Injury 1993;24:416-8.  Back to cited text no. 4
[PUBMED]    
5.Boileau P, Bicknell RT, Mazzoleni N, Walch G, Urien JP. CT scan method accurately assesses humeral head retroversion. Clin Orthop Relat Res 2008;466:661-9.  Back to cited text no. 5
[PUBMED]    
6.DeLude JA, Bicknell RT, MacKenzie GA, Ferreira LM, Dunning CE, King GJ, et al. An anthropometric study of the bilateral anatomy of the humerus. J Shoulder Elbow Surg 2007;16:477-83.  Back to cited text no. 6
[PUBMED]    
7.Hernigou P, Duparc F, Hernigou A. Determining humeral retroversion with computed tomography. J Bone Joint Surg Am 2002;84:1753-62.  Back to cited text no. 7
[PUBMED]    
8.Balg F, Boulianne M, Boileau P. Bicipital groove orientation: Considerations for the retroversion of a prosthesis in fractures of the proximal humerus. J Shoulder Elbow Surg 2006;15:195-8.  Back to cited text no. 8
[PUBMED]    
9.Kummer FJ, Perkins R, Zuckerman JD. The use of the bicipital groove for alignment of the humeral stem in shoulder arthroplasty. J Shoulder Elbow Surg 1998;7:144-6.  Back to cited text no. 9
[PUBMED]    
10.Boileau P, Walch G. The three-dimensional geometry of the proximal humerus. Implications for surgical technique and prosthetic design. J Bone Joint Surg Br 1997;79:857-65.  Back to cited text no. 10
[PUBMED]    
11.Doyle AJ, Burks RT. Comparison of humeral head retroversion with the humeral axis/biceps groove relationship: A study in live subjects and cadavers. J Shoulder Elbow Surg 1998;7:453-7.  Back to cited text no. 11
[PUBMED]    
12.Hertel R, Knothe U, Ballmer FT. Geometry of the proximal humerus and implications for prosthetic design. J Shoulder Elbow Surg 2002;11:331-8.  Back to cited text no. 12
[PUBMED]    
13.Tillett E, Smith M, Fulcher M, Shanklin J. Anatomic determination of humeral head retroversion: The relationship of the central axis of the humeral head to the bicipital groove. J Shoulder Elbow Surg 1993;2:255-6.  Back to cited text no. 13
[PUBMED]    
14.Kontakis GM, Damilakis J, Christoforakis J, Papadakis A, Katonis P, Prassopoulos P. The bicipital groove as a landmark for orientation of the humeral prosthesis in cases of fracture. J Shoulder Elbow Surg 2001;10:136-9.  Back to cited text no. 14
[PUBMED]    
15.Hempfing A, Leunig M, Ballmer FT, Hertel R. Surgical landmarks to determine humeral head retrotorsion for hemiarthroplasty in fractures. J Shoulder Elbow Surg 2001;10:460-3.  Back to cited text no. 15
[PUBMED]    
16.Robertson DD, Yuan J, Bigliani LU, Flatow EL, Yamaguchi K. Three-dimensional analysis of the proximal part of the humerus: Relevance to arthroplasty. J Bone Joint Surg Am 2000;82:1594-602.  Back to cited text no. 16
[PUBMED]    
17.Cassagnaud X, Maynou C, Petroff E, Dujardin C, Mestdagh H. A study of reproducibility of an original method of CT measurement of the lateralization of the intertubercular groove and humeral retroversion. Surg Radiol Anat 2003;25:145-51.  Back to cited text no. 17
[PUBMED]    
18.Goud A, Segal D, Hedayati P, Pan JJ, Weissman BN. Radiographic evaluation of the shoulder. Eur J Radiol 2008;68:2-15.  Back to cited text no. 18
    
19.Evans EM. Fractures of the radius and ulna. J Bone Joint Surg Br 1951;33:548-61.  Back to cited text no. 19
[PUBMED]    
20.Kim JJ, Kim E, Kim KY. Predicting the rotationally neutral state of the femur by comparing the shape of the contralateral lesser trochanter. Orthopedics 2001;24:1069-70.  Back to cited text no. 20
[PUBMED]    
21.Lin J, Hou SM. Rotational alignment of humerus after closed locked nailing. J Trauma 2000;49:854-9.  Back to cited text no. 21
[PUBMED]    

Top
Correspondence Address:
Eugene Kim
Department of Orthopaedic Surgery, Kangbuk Samsung Hospital, Sungkyunkwan University School of Medicine, 29, Saemoonan ro, Jongro-gu, Seoul, 110 746
Republic of Korea
Login to access the Email id

Source of Support: The author Eugene Kim and Shinsuk Park were supported by the National Research Foundation grant funded by the Korea government MEST) (2010-0027294), Conflict of Interest: None


DOI: 10.4103/0019-5413.104210

Rights and Permissions


    Figures

  [Figure 1], [Figure 2], [Figure 3]
 
 
    Tables

  [Table 1], [Table 2]



 

Top
 
 
 
  Search
 
 
    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Email Alert *
    Add to My List *
* Registration required (free)  
 


 
    Abstract
   Introduction
    Materials and Me...
   Results
   Discussion
   Conclusion
   Acknowledgment
    References
    Article Figures
    Article Tables
 

 Article Access Statistics
    Viewed3018    
    Printed50    
    Emailed0    
    PDF Downloaded88    
    Comments [Add]    

Recommend this journal