Neurobionplus
Home About Journal AHEAD OF PRINT Current Issue Back Issues Instructions Submission Search Subscribe Blog    
Login 

Users Online: 1710 
Print this page  Email this page Small font sizeDefault font sizeIncrease font size 
 


 
 Table of Contents    
CASE REPORT  
Year : 2011  |  Volume : 45  |  Issue : 5  |  Page : 470-472
Atlantoaxial arthrodesis using C1-C2 transarticular screw fixation in a case of Morquio syndrome


Department of Orthopedics, Bombay Hospital Institute of Medical Sciences, Bombay Hospital, Mumbai, India

Click here for correspondence address and email

Date of Web Publication18-Aug-2011
 

   Abstract 

Prophylactic or therapeutic arthrodesis is recommended for atlantoaxial instability in Morquio syndrome. Occipitocervical fusion, the common approach for upper cervical fusion in Morquio syndrome sacrifices the movements at the occipitoatlantal joints. The use of C1-C2 transarticular screws for achieving C1-C2 arthrodesis, without compromising mobility at the occipitoatlantal joint in Morquio syndrome has not been reported. We report a case of Morquio syndrome with atlantoaxial instability and odontoid hypoplasia, where we successfully achieved C1-C2 arthrodesis using transarticular screws and bone graft. The advantages of this method over other methods of atlantoaxial arthrodesis in Morquio syndrome have also been discussed.

Keywords: Atlantoaxial arthrodesis, Morquio syndrome, occipitocervical fusion, transarticular screw

How to cite this article:
Kulkarni AG, Shah SM. Atlantoaxial arthrodesis using C1-C2 transarticular screw fixation in a case of Morquio syndrome. Indian J Orthop 2011;45:470-2

How to cite this URL:
Kulkarni AG, Shah SM. Atlantoaxial arthrodesis using C1-C2 transarticular screw fixation in a case of Morquio syndrome. Indian J Orthop [serial online] 2011 [cited 2019 Dec 13];45:470-2. Available from: http://www.ijoonline.com/text.asp?2011/45/5/470/83766

   Introduction Top


Atlantoaxial instability in Morquio syndrome can be due to ligamentous laxity, hypoplastic/dysplastic odontoid, or failure of fusion of the C1 ring anteriorly or posteriorly. [1],[2],[3],[4] It is notorious not only for producing neurologic symptoms but also because of the associated mortality. Prophylactic fusion of the upper cervical spine has been recommended in patients even before the appearance of neurologic symptoms. [1],[4],[5] Occipitocervical fusion is the recommended method of upper cervical fusion in these patients. [4],[5] We report a case of Morquio syndrome where atlantoaxial instability was managed successfully with C1-C2 arthrodesis only, using transarticular screws and bone grafts.


   Case Report Top


A 6-year-old girl, a known case of Morquio syndrome, presented with neck pain of insidious onset, along with progressive weakness of all the four limbs since 3 months. She had an unstable gait, with history of repeated falls. Neurological examination revealed grade 3 power and spasticity in all four limbs, with extensor plantar responses bilaterally. All sensations were intact.

Radiographs and computed tomography (CT) images of the cervical spine revealed a hypoplastic odontoid [Figure 1]a, bifid posterior arch of C1, atlantoaxial subluxation, and increased atlantodens interval. MRI confirmed atlantoaxial subluxation with spinal cord compression at C1-C2 level [Figure 1]b.
Figure 1: (a) Mid-sagittal CT image showing odontoid hypoplasia (b) Preoperative MR image showing the wafer-thin spinal cord at the craniovertebral junction due to the atlantoaxial subluxation (c) Postoperative MR image showing adequate decompression of the spinal cord

Click here to view


The child was operated on an emergency basis in view of the progressive neurological deficit. CT scan images of the patient were assessed for suitability for placement of 3.5-mm transarticular screws across the C1-C2 facet joints. Use of an operating microscope assisted in the dissection. This was coupled with intraoperative fluoroscopy to enhance safety in screw placement. The patient, in cervical traction, was placed prone, with the head end of the table elevated to 30°. Satisfactory reduction of the atlantoaxial joint was confirmed fluoroscopically. A posterior midline incision was made extending from the occiput to the C2 spinous process and was extended deep into the relatively avascular midline structures. The posterior arch of the  Atlas More Details was exposed by subperiosteal dissection. It was confirmed to be bifid as had been revealed by preoperative radiographs. It was completely excised and utilized as bone graft for C1-C2 lateral mass fusion. An adequate decompression was performed and the C1-C2 facet joints on both sides were exposed. After widely excising the capsule of the joint, it was packed with bone graft. Under image guidance, a guide wire was passed across the C1-C2 facet joint bilaterally in the trajectory previously described. [6],[7] A 3.5-mm screw with a length of 34 mm was placed along the predetermined screw trajectory bilaterally. A midline stabilization could not be performed due to the presence of the bifid C1 posterior arch.

Postoperatively, the neck was immobilized in a Philadelphia collar for 3 months. The patient was ambulated with support after 2 days. The power in the limbs improved gradually and was restored to MRC grade 5/5 at the end of 3 months, with no residual spasticity. The patient was then ambulating normally without any aid. Postoperative MRI revealed adequate decompression of the spinal cord [Figure 1]c. There was no evidence of instability on the flexion-extension lateral radiograph of the cervical spine at 24 months and the fusion did not extend beyond the desired level [Figure 2]a and b.
Figure 2: Anteroposterior radiograph of upper cervical spine (a) and lateral radiograph (b) at 24 months follow-up showing C1-C2 transarticular fixation

Click here to view



   Discussion Top


Disability and life expectancy in patients with Morquio syndrome depends upon skeletal complications, amongst which cervical myelopathy is the most important. [1],[4] Atlantoaxial instability in these patients can result in life- threatening dislocation. Prophylactic fusion of the upper cervical spine can prevent the development of myelopathy and can be lifesaving. [1],[4] Occipitocervical fusion is the commonly recommended method in these patients. [4],[5] Ransford et al.[4] performed occipitocervical fusion in 17 patients with Morquio syndrome. They used onlay femoral or tibial autografts placed posteriorly, secured to the laminae of C1 and C2 to obtain occipitocervical fusion. Gluf and Brockmeyer [8] reported a case of Morquio syndrome where C1- C2 transarticular screws were utilized within the occipitocervical construct. However, occipitocervical fusion for atlantoaxial instability sacrifices the movements at the occipitoatlantal joint [50% flexion-extension (30°) and 10° lateral bending]. In this case, only atlantoaxial arthrodesis was performed, thus preserving occipitoatlantal motion. Atlantoaxial arthrodesis was accomplished using C1-C2 transarticular screw fixation as this method has certain advantages. It provides excellent mechanical immobilization, thus maximizing the chances of fusion. [7] Moreover, the bone graft placed in the C1-C2 facet joints is in compression mode, which is physiologically optimum for successful fusion; on the other hand, the onlay graft in occipitocervical construct is in tension mode. [8] Fusion rates of up to 100% have been reported in pediatric patients with C1-C2 transarticular screws. [8] Solid osseous union between C1-C2 facet joints was noted radiographically at 3 months follow-up in our patient. The power in the limbs was restored and there was no residual spasticity. The fusion did not extend beyond the desired level and the occipitoatlantal joint was mobile. This method may be associated with complications like screw malpositioning or catastrophic vascular or neural injury. However, meticulous preoperative planning to determine the screw trajectory and to assess the position of the foramen transversarium, along with the use of intraoperative fluoroscopy, can help avoid complications. [7],[8] C1-C2 arthrodesis using wires and grafts has been extensively used. However, biomechanical studies have shown that they provide only semirigid fixation and therefore require a halo body jacket to increase the chances of fusion. [9] Studies comparing C1-C2 fusion rates using screws with that by wires plus bone grafts and halo body jacket report significantly higher fusion rates with the former (98% vs 86 %; P=0.003). [8]

To the best of our knowledge there is no mention in the literature of a case where atlantoaxial instability in Morquio syndrome was managed exclusively with C1-C2 transarticular screws and bone graft. In contrast to occipitocervical fusion, there was no arthrodesis of the mobile occipitoatlantal joint and thus motion at that level could be preserved. We chose C1-C2 screws as this provides rigid internal fixation and achieves fusion rates significantly higher than those with cable fixations. This technique can be used for both prophylactic fusions as well for treatment of symptomatic patients, where it can be performed after surgical decompression.

 
   References Top

1.Spranger J. Mucopolysaccharidoses. In: Kliegman RM, Behrman RE, Jenson HB, Stanton BF, editors. Nelson's Textbook of Pediatrics. 18 th ed, Vol. 1. New Delhi: Elsevier; 2008. p. 624-5.  Back to cited text no. 1
    
2.Dickson RA. Spinal deformities in children. In: Duthie RB, Bentley G, Dhal AK, editors. Mercer's Orthop Surg 9 th ed, Vol. 1. New Delhi: Jaypee; 2003. p. 521-2.  Back to cited text no. 2
    
3.Duthie RB, Smith R. Developmental diseases of the skeleton. In: Duthie RB, Bentley G, Dhal AK, editors. Mercer's Orthop Surg 9 th ed, Vol. 1. New Delhi: Jaypee; 2003. p. 238-41.  Back to cited text no. 3
    
4.Ransford AO, Crockard HA, Stevens JM, Modaghegh S. Occipito-atlanto-axial fusion in Morquio-Brailsford syndrome. A ten-year experience. J Bone Joint Surg Br 1996;78:307-13.  Back to cited text no. 4
[PUBMED]  [FULLTEXT]  
5.Kopits SE. Orthopaedic complications of dwarfism. Clin Orthop 1976;114:153-79.  Back to cited text no. 5
[PUBMED]    
6.Brockmeyer DL, York JE, Apfelbaum RI. Anatomical suitability of C1- 2 transarticular screw placement in pediatric patients. J Neurosurg 2000;92:7-11.  Back to cited text no. 6
[PUBMED]    
7.Dickman CA, Sonntag VK. Posterior C1- C2 transarticular screw fixation for Atlantoaxial arthrodesis. Neurosurgery 1998;43:275-81.  Back to cited text no. 7
[PUBMED]  [FULLTEXT]  
8.Gluf WM, Brockmeyer DL. Atlantoaxial transarticular screw fixation: A review of surgical indications, fusion rate, complications and lessons learned in 67 pediatric patients. J Neurosurg 2005;2:164-9.  Back to cited text no. 8
    
9.Dickman CA, Crawford NR, Paramore CG. Biomechanical characteristics of C1-2 cable fixations. J Neurosurg 1996; 85:316-22.  Back to cited text no. 9
[PUBMED]  [FULLTEXT]  

Top
Correspondence Address:
Arvind G Kulkarni
Consultant Spine and Disc Replacement Surgeon, Bombay Hospital and Medical Research Center, Room No. 206, 2nd Floor MRC 12, New Marine Lines, Mumbai - 400 020
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/0019-5413.83766

Rights and Permissions


    Figures

  [Figure 1], [Figure 2]

This article has been cited by
1 Occipitocervical stabilization using bilateral laminar C2 screws in children with mucopolysaccharidosis IVA
Petr Vanek,Helena Homolkova,Vladimir Benes,Jiri Zeman
European Spine Journal. 2015;
[Pubmed] | [DOI]



 

Top
 
 
 
  Search
 
 
    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Email Alert *
    Add to My List *
* Registration required (free)  
 


 
    Abstract
   Introduction
   Case Report
   Discussion
   Introduction
   Case Report
   Discussion
    References
    Article Figures
 

 Article Access Statistics
    Viewed3001    
    Printed100    
    Emailed0    
    PDF Downloaded101    
    Comments [Add]    
    Cited by others 1    

Recommend this journal